SolarBond HT

Acetoxy silicone Adhesive / Sealant

SolarBond High temperature is a one-part, non-slumping 100% silicone sealant / adhesive. It cures when it is exposed to moisture in the air to form a tough rubbery seal.

SolarBond High temperature is a one-part, non-slumping 100% silicone sealant / adhesive. It cures when it is exposed to moisture in the air to form a tough rubbery seal.

SolarBond HT High temperature was formulated to perform at temperatures ranging from –65°C to 260°C (-85°F to 500°F) under continuous operating conditions. During intermittent exposure, SolarBond HT will withstand temperatures as high as 316°C (600°F

 

Applications

SolarBond HT is ideally suited for sealing and bonding high temperature terminations within a SolarClad system where Stainless Steel end caps are used and heat trace cabling encapsulations. It is also used in applications for other critical bonding, sealing, potting, encapsulating and protective coatings where parts must perform at high temperatures.

Product Data
BasisOne part moisture cure sealant
ColourRed
Packaging300ml cartridge
Specific gravity1.01
Viscosity flowNon Sag
Tack free time15 minutes at 20º C (77F) and 50% R.H.
Cure time3.2 mm per day. Full cure 3days
Pull of strength>2.2mPa at RT 23ºC
HardnessShore A
Tensile Strength2.4 MPa (350 psi)
Elongation500%

I'M INTERESTED IN SolarBond HT

OTHER SOLARTECH PRODUCTS